Bardahl No Smoke Oil Treatment 500ml

Bardahl

£12.42 £10.21 (You save £2.21)

SKU: 10125

Quantity:

Product Description

BARDAHL

No Smoke Engine Oil Treatment - 500ml

Extra thick viscosity improver to prevent oil burning in high mileage vehicles thus preventing smoke emissions.

The ORIGINAL No Smoke Treatment! Extra thick formula seals the spaces between valves and guides, between piston rings and cylinder walls, thus reducing oil consumption and burning. Improves compression, power and performance, cushions worn bearings and quiets noisy lifters. It is the most effective additive for oil burning cars to reduce exhaust smoke.

Stops oil burning and smoke emissions
Helps pass emissions control tests
Restores engine power
Saves you money

- Specifications
- ENGINE: Gas, Diesel
- PRODUCT SIZE: 12x16oz / 24x16oz
- PRODUCT TYPE: Oil Additive
- DESCRIPTION: No Smoke
- RECOMMENDED USE:
  Every 3,000 miles\5,000 km oil change in all gasoline and diesel engines. Use as directed.
- Back Label
Excess exhaust smoke is a sign that oil is getting past valves and piston rings into the combusion chamber. The extra thick formula of Bardahl NO-SMOKE works better than similar products to seal the spaces between the valves and guides, between piston rings and cylinder walls. Bardahl NO-SMOKE also improves compression and performance, cushions worn bearings and quiets noisy lifters. DIRECTIONS: At each oil change add to crankcase 8oz. for 4-cyl.; 12oz. for 6-cyl.; 16oz. for 8 cyl. Between oil changes add sufficient NO-SMOKE to control smoke emissions, but do not overfill the crankcase. Only add NO-SMOKE to an engine that is idling at operating temperature.
- Warning
Keep out of reach of children